Free · EUDR geolocation check

EUDR geolocation check — find the plot errors before TRACES does

Upload the plot file your producer or cooperative sent you, or drop a pin. CanopyProof reads GeoJSON, KML/KMZ, WKT and CSV, flags every coordinate EUDR would not accept — too few decimals, a point where a polygon is needed, a plot in the ocean — and screens the plots that pass against satellite forest-loss data keyed to the 31 December 2020 cut-off. No account, no TRACES registration.

Plot input

Scan one plot

Click the map to place the plot, or type its coordinates. Plots up to 4 ha may be given as a point; anything larger needs a boundary.

ISO2, optional — we read it from the result if you leave it blank

Tap the map to set the location, or type the coordinates below.

Tap the map to drop each corner of the boundary, going around the plot. Undo or clear if you slip.

At least three points, one “latitude, longitude” per line. The boundary is closed for you.

Scan a plot list

GeoJSON, KML/KMZ (Google Earth), WKT or CSV — the files your producers already have. Up to 5 plots per scan.

Sample GeoJSON · Sample CSV

Which file? Where do I find the coordinates?
  • CSV: one plot per row with the columns name, country, latitude, longitude, area_hectares (or a wkt column instead of latitude and longitude). Semicolons and decimal commas from German Excel are fine.
  • KML/KMZ: in Google Earth or Google My Maps, export the layer as KML. Polygons work as they are; for a single point, add an area_hectares field.
  • WKT: one POLYGON, MULTIPOLYGON or POINT per line, as QGIS exports it (longitude first).
  • EUDR needs at least 6 decimal places (for example -3.465305). Plots over 4 ha must be polygons, not points.

No file yet? Ask your exporter or cooperative first: they often hold the farm polygons. A producer can also stand in the plot and read the position from the phone's map app (long-press in Google Maps shows it).

Easier for many producers: create a free account and send each one a collection link. They drop pins or upload their file, with no account on their side. Create a free account →

What happens to your file: we read it once and do not keep the file. The plot locations go to Whisp (FAO) for screening. The plots and their results are kept for 30 days so your result link and PDF keep working, then deleted automatically. Hosted in the EU. Privacy policy

Example scan result: verdict low for a 0.8 hectare plot in Colombia — no forest loss since 2020, valid plot geometry — with the evidence PDF
Illustration · sample data

Screened with Whisp, the open-source tool from FAO's Open Foris, against public forest-cover and forest-loss datasets keyed to the 31 December 2020 cut-off — including the EU JRC Global Forest Cover 2020 map and Hansen Global Forest Change. About Whisp

Download a sample evidence PDF · Sample data, not a real plot

Free scans are capped at 5 plots per scan and 3 scans a day, so the satellite quota stays available to everyone. Paid plans include a monthly screening allowance.

Also scan: Coffee · Cocoa · Timber & wood products

Keep every result for five years — free for 3 suppliers.

Start free

How the check works

  1. 1

    Upload a file or place a plot on the map. GeoJSON, KML and KMZ from Google Earth, WKT as QGIS exports it, or a CSV with name, country, latitude, longitude and area_hectares — semicolons and decimal commas from German Excel are fine. The free scan takes up to 5 plots at a time.

  2. 2

    Every plot is checked against the geolocation rules of Regulation (EU) 2023/1115: coordinates must be plain decimal numbers with at least six decimal places, inside the valid range and not at 0, 0; a point needs its area, and a plot over 4 hectares must be a polygon; a polygon needs at least three distinct points and must enclose an area.

  3. 3

    Rows that fail are listed with the reason — “not precise enough”, “plots over 4 ha must be drawn as a polygon” — so you can send your producer a precise correction instead of a vague request. Rows that pass go on to the next step.

  4. 4

    The plots that pass are screened with FAO’s open Whisp tool, the same screening the paid plans use. You get a traffic light per plot — no post-2020 deforestation detected, forest loss detected, or inconclusive — and an evidence PDF sent to your inbox.

What EUDR asks for in a geolocation

Geolocation means the latitude and longitude of every plot of land where the commodity was produced, with at least six decimal digits. For plots of more than 4 hectares used for anything other than cattle, a polygon with enough points to describe the boundary is required; plots up to 4 hectares may be a single point.

The geolocation goes into the due diligence statement in the EU TRACES system, as GeoJSON. One statement can cover many plots, but each plot in it needs its own geolocation — a single point for a whole washing station or sawmill is not a plot.

The deforestation cut-off is 31 December 2020: the commodity must come from land that was not deforested after that date. The geolocation is what makes that checkable, which is why a bad coordinate is the most common reason a statement cannot be filed.

Where plot files usually go wrong

Coordinates rounded to four or five decimals by a spreadsheet, latitude and longitude swapped, a single point given for a 12-hectare farm, or a KML point with no area. All four are caught by the check above, row by row, before anything is screened or filed.

What small importers ask us first

Is the geolocation check really free?

Yes. No account and no card: up to 5 plots per scan and 3 scans a day, so the shared satellite quota stays available to everyone. With a free account you can keep the result, and paid plans include a monthly screening allowance.

Which file formats can I upload?

GeoJSON, KML and KMZ (Google Earth, Google My Maps), WKT (one POINT, POLYGON or MULTIPOLYGON per line, as QGIS exports it) and CSV. For a point in KML or WKT, add an area_hectares field; polygons work as they are.

My producer only has GPS points. Is that enough?

For plots up to 4 hectares, a point with its area is accepted. For larger plots EUDR requires a polygon. A producer can walk the boundary with a phone map app, or your exporter or cooperative may already hold the farm polygons — ask them first.

How do I collect plots from many producers?

Create a free account and send each supplier a collection link. They drop pins or upload their file without an account of their own, and every plot goes through the same checks before it reaches you.

Does a green result mean my product is EUDR compliant?

No. The check shows that the geolocation is usable and that satellite data shows no forest loss after the cut-off on those plots. Due diligence also covers legality in the country of production, your risk assessment and the statement in TRACES — and the responsibility stays with you.

Related: EUDR due diligence statement — from your plot file to a TRACES reference number · How it works

CanopyProof provides compliance tooling, not legal advice. A screening result is evidence you assess, not an official clearance; responsibility under the EU Deforestation Regulation stays with you.

Also from Talivio: A11yProof PrivaScan TCSR All Talivio products Talivio Technology OÜ · Tallinn, Estonia Made by Talivio Compliance tooling, not legal advice.